The DSH air dehumidifiers are the most innovative solution to the problem of condensate on injection moulds and blowers.
Air is dehumidified with a desiccant rotor system that brings the air dew point to -10°C. With airflows from 800 to 3000 m3/h, they can be mounted on one or more processing machines.
TECHNICAL SPECIFICATIONS:
Microprocessor control of the machine, leading to a constant dew point with PID regeneration control.
Filtration through an easily accessible and cleanable panel filter.
Air is pre.cooled by an exchanger using low temperature water (7-10°C). Condensed water is expelled by a pump with in-built floater.
The high-head fan sends air to the high-efficiency absorbent rotor providing a stable process also in tropical climatic conditions with temperatures of up to 45°C and humidity up to 90%.
A post-cooler may be installed to reduce the outflowing air temperature
RS485 ModBus interface
ACCESSORIES:
Dew Point device with alarm.
Touch screen colour operator panel
Clogged filter pressure switch
THE ADDED VALUE:
Increases productivity by reducing the cycle time.
Constant process in all climates
Absence of waste due to mould moisture.
No mould corrosion risk and subsequent maintenance.